Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

Close

laser driver 01 | PCB Design

laser driver 01
Version 1 - Last update: Oct 4, 2015

basic driver board for DVDRW laser diodes

Part numbers are printed on the top of the board. Though it claims to have errors, there are none. This was my first project and I finished it good, but not in the process they wanted. Bill of materials:

2x 10 ohm resistors

1x Diode 1N4001

1x variable resistor 100 ohm

1x capacitor 10uF 16v

1x regulator LM317

1x laser diode from DVDRW drive

7.2 volts ideal, but will work with up to 9v.

The board has two holes drilled designed for screw-mounting. Hole diameter 2mm.

Comments disabled