Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

Close

Electronics Lab has moved to Tinkercad. Copy your projects to Tinkercad to continue editing your designs. Learn More Got it!

Skate Two Shield | PCB Design

Skate Two Shield
Version 14 - Last update: Oct 11, 2015

Shield for self balancing skateboard that fits on a Netduino, has a Pro Micro Arduino on it, along with a 6DOF IMU, level shifter, power management, etc.

Shield for self balancing skateboard that fits on a Netduino, has a Pro Micro Arduino on it, along with a 6DOF IMU, level shifter, power management, etc.

Now that I've built this, here are a few issues with the board that should be addressed in any revisions: Pro Micro holes are not nearly large enough. Level Shifter and IMU holes not large enough, or just barely. Many pins are too close together, notably the power switch input. Need better connectors for most connections. Consider combining many pins into another 10 pin connector. Resistors for headlight LEDs aren't correct, I put jumpers in and will put the resistors on the LEDs themselves. Many vias were not necesary, could have just drawn on back side of board. One dead hole for A2 pin. Many unused Digital lines on Pro Micro

Comments disabled