Update your browser to view this website correctly. Update my browser now
Tiny header board for the Atmel AVR ATtiny chips in DIP-8 such as ATtiny 25/45/85 (ATtiny13 as well).
Tiny header board for the Atmel AVR ATTiny chips in DIP-8 such as ATTiny 25/45/85.
The goal is to have a board that you can start using right a way, contains the minimum required components to run properly and will even let you prototype simple projects without using a breadboard.
This is а circuit that I've been using for a while and now would like to build it and share it here.
Here is what it has: - The ISP is 10-pin - most programmer you find today on the market, especially more affordable ones, use such connector. - There are 2 header connectors (female 2x4 and 2x5) to connect to the chip I/O pins. They are 2-row where one is GND so you can connect some external components directly on the board.
What it does not have: - There is no connectors for XTAL because for most tiny projects it is not needed. In all cases it could be connected directly to the headers.